Allen Engineering Corporation RAZORBACK RIDERS PRO1200C, Operations Manual And Parts Book

Page: 3 / 47

LIMITED W LIMITED W ARRANTY ARRANTY
Allen Engineering Corporation warrants its products to be free of defects in material or workmanship for the fol-
lowing periods:
A. All New Machines and Parts 6 Months
B. All New Gear Boxes 2 Years
C. All Factory Reconditioned Gear Boxes 1 Year
Warranty period begins on first day of use by End User. This first day of use is established by a completed war-
ranty card or a Bill of Sale to the end user. All warranty is based on the following limited warranty terms and
conditions.
1. Allen Engineering Corporation’s obligation and liability under this warranty is limited to repairing or replac-
ing parts if, after Allen’s inspection, it is determined to be a defect in material or workmanship. Allen
Engineering Corporation reserves the choice to repair or replace.
2. If Allen Engineering Corporation chooses to replace the part, it will be at no cost to the customer and will
be made available to the Distributor/Dealer from whom the customer purchased the product.
3. Replacement or repair parts, installed in the product, are warranted only for the remainder of warranty peri-
od of the product as though they were the original parts.
4. Allen Engineering Corporation’s warranty applies only to the products that are manufactured by Allen
Engineering and does not cover component parts such as engines and clutches. Allen Engineering
Corporation DOES NOT warranty clutches. Engine warranty claims should be made directly to an author-
ized factory service center for the particular engine make.
5. Allen Engineering Corporation’s warranty does not cover the normal maintenance of products or its compo-
nents (such as engine tune-ups and oil changes). The warranty also does not cover normal wear and tear
items (such as belts and consumables).
6. Allen Engineering Corporation’s warranty will be void if it is determined that the defect resulted from opera-
tor abuse, failure to perform normal maintenance on the product, modification to product, alterations or
repairs made to the product without the written approval of Allen Engineering Corporation. Allen
Engineering Corporation specifically excludes from warranty any damage to any trowels resulting from an
impact to the rotors. Allen Engineering Corporation also excludes from warranty any failure of clutches on
any engine driven piece of equipment.
7. If a new gear box has a factory defect within the first year of use, Allen Engineering Corporation will either
repair the gear box or replace it with a new gear box. If a new gearbox has a factory defect in the second
year of use, Allen Engineering Corporation will either repair it or replace it with a factory reconditioned gear
box. Impact damage is NOT covered under the gear box warranty.
8. Allen Engineering Corporation will pay shop labor repair on warranty at the Allen Engineering Shop Labor
Rate in existence on the date of the warranty claim. An Allen Engineering Labor Chart will determine the
time allowed to complete a repair and will govern the shop labor hours that will be allowed.
9. Allen Engineering Corporation will pay freight on warranty replacement parts at Worldwide standard ground
rates. No warranty replacement parts will be shipped air freight at the expense of Allen Engineering
Corporation. Allen Engineering only pays outbound freight charges when sending warranty replacement
parts to the customer VIA ground service. Allen Engineering does not pay any inbound freight, however, if
Allen Engineering determines this to be warranty defect only then will Allen Engineering reimburse the cus-
tomer for inbound freight at standard ground rates.
10. Allen Engineering Corporation’s warranty policy WILL NOT COVER the following; taxes, shop supplies,
environmental surcharges, air freight, travel time, loss of rental revenue, or any other charges whatsoever
or any liabilities for direct, incidental, or consequential damage or delay.
11. Allen Engineering Corporation makes no other warranty, expressed or implied. This limited war-
ranty is in lieu of the warranty of merchantability and fitness. There are no other warranties that
extend beyond the description on this document.
12. No Allen Engineering Corporation employee or representative is authorized to change this warranty in any
way or grant any other warranty unless such change is made in writing and signed by an officer of Allen
Engineering Corporation.