Rockwell Automation Publication 750-UM006C-EN-P - March 2022
89
Configure and Start Up the Drive
Chapter 4
In our example, the selected Logix controller created tags are based on
the Datalinks that were configured during commissioning. This example
shows a trend that observes the position, speed, torque, current, and
position following error of the drive.
You can use the Trend Properties dialog box to configure the chart pen
colors, scaling, and so on. The trend captures the data when online with
the Logix Designer application later in this procedure. See
for more information on trend configuration.
How to Use Trend Settings
1. In the Controller Organizer, right-click your Trend and select Properties
to open the properties dialog box. Here you can use the trend properties
to configure the chart pen colors, scaling, and so on.
IMPORTANT
This example is from an online setup, Trend will not show results until the
drive is fully commissioned.
