8
SLC 5/01™ and SLC 5/02™ Modular Processors
Publication 1747-IN011B-MU-P - July 2002
Apply Power to the Processor
1.
Energize the chassis power supply.
2.
Check the chassis power supply and processor LEDs. The power LED on
the power supply should be on and the fault LED on the processor should
be flashing.
Load Your Software
Refer to your programming software documentation.
Processor
Release
Card Guide
Protective Wrap
Power
Supply
Indicates the LED is OFF.
Indicates the LED is ON.
Indicates the LED is FLASHING.
Status of LED does not matter.
POWER
RUN
CPU FAULT
FORCED I/O
BATTERY LOW
COMM
The RUN LED on the SLC 5/01 processor is
actully labeled “PC RUN.” Also, the SLC
5/01 processor does not have a COMM
LED.
