Allen-Bradley PowerFlex 527, User Manual, Page: 59 / 176

Rockwell Automation Publication 520-UM002B-EN-E - December 2017 59
Configuring the PowerFlex 527 Drive with Integrated Motion Chapter 3
d. Enter the address of your PowerFlex 527 drive.
In this example, the last octet of the address is 180.
6. Proceed to Configure the PowerFlex 527 Drive on page 59 to continue
configuring your drive.
Configure the PowerFlex 527
Drive After you have added a PowerFlex 527 drive to your project, you will need to
configure the type of safety connection suitable for your application. See the
following sections for instructions on configuring the drive for the different types
of safety connections.
• Configure Drive with Hardwired Safety Connections on page 59
• Configure Drive with Integrated Safety Connections on page 61
Configure Drive with Hardwired Safety Connections
Follow these steps to configure the PowerFlex 527 drives with hardwired safety.
1. Ensure that you have done the steps in Add a PowerFlex 527 Drive on
page 57 before proceeding.
2. Under Module Definition, click Change.
The Module Definition dialog box appears.
Connection Mode Controller Needed Description
Motion only ControlLogix 1756-L7x,
GuardLogix 1756-L7xS,
CompactLogix 5370,
Compact GuardLogix 5370
ControlLogix 1756-L8x, or
CompactLogix 5380 Hardwired Safe Torque-Off (STO) connections are possible.
Motion is managed by this controller.
Safety is managed by another controller that has a Safety only
connection to the drive.
Motion and Safety GuardLogix 1756-L7xS or
Compact GuardLogix 5370 Motion and Safety are managed by this controller.
Safety only GuardLogix 1756-L7xS or
Compact GuardLogix 5370 Safety is managed by this controller.
Motion is managed by another controller that has a Motion only
connection to the drive.
IMPORTANT
To configure PowerFlex 527 drives, you must be using the Logix Designer
application, version 24.00 or later.