Rockwell Automation Publication 2198-UM002E-EN-P - February 2018
339
Motor Control Feature Support
Appendix D
Configure the Flux Up Attributes
Follow these steps to configure the flux-up attributes.
1.
In the Controller Organizer, right-click an axis and choose Properties.
2.
Select the Parameter List category and scroll to FluxUpControl.
3.
From the FluxUpControl pull-down menu, choose the proper delay
value appropriate for your application.
4.
If you chose Manual Delay in
, enter a value in the FluxUpTime
attribute appropriate for your application.
If you chose No Delay or Automatic Delay in
, the FluxUpTime
attribute does not apply.