FLEX I/O 5V DC TTL Digital Input and Output Modules
5
Publication 1794-IN119C-EN-P - August 2018
ATTENTION:
If this equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment may be impaired.
ATTENTION:
Read this document and the documents listed in the Additional
Resources section about installation, configuration, and operation of this
equipment before you install, configure, operate, or maintain this product. Users
are required to familiarize themselves with installation and wiring instructions
in addition to requirements of all applicable codes, laws, and standards.
ATTENTION:
Installation, adjustments, putting into service, use, assembly,
disassembly, and maintenance are required to be carried out by suitably trained
personnel in accordance with applicable code of practice.
ATTENTION:
In case of malfunction or damage, no attempts at repair should be
made. The module should be returned to the manufacturer for repair. Do not
dismantle the module.
ATTENTION:
This equipment is certified for use only within the surrounding air
temperature range of 0…55 °C (32…131 °F). The equipment must not be used
outside of this range.
ATTENTION:
Use only a soft dry anti-static cloth to wipe down equipment. Do
not use any cleaning agents.
WARNING:
When you insert or remove the module while backplane power is
on, an electric arc can occur. This could cause an explosion in hazardous
location installations.
Be sure that power is removed or the area is nonhazardous before proceeding.
Repeated electric arcing causes excessive wear to contacts on both the module
and its mating connector. Worn contacts may create electrical resistance that
can affect module operation.
WARNING:
If you insert or remove the module while backplane power is on, an
electrical arc can occur. This could cause an explosion in hazardous location
installations.
Be sure that power is removed or the area is nonhazardous before proceeding.