ControlNet Coax BNC2TNC Adapter
7
Publication 1786-IN002A-US-P - May 2000
4.
Attach cables according to your network topology.
ATTENTION
!
Do not over tighten the hardware. You can damage the
adapter if you over tighten the hardware. Apply the torque at
0.2-0.4 N-m (1-2 ft.-lbs). Only use the hardware that we
provide with the BNC2TNC connector. If you substitute
hardware, we cannot guarantee the integrity of your network.
1786-RPA
1786-RPCD
REPEATER DUAL COPPER MODULE
1786-RPCD
1786-RPCD
REPEATER DUAL COPPER MODULE
1786-RPCD
1786-RPCD
REPEATER DUAL COPPER MODULE
1786-RPCD
1786-RPCD
REPEATER DUAL COPPER MODULE
1786-RPCD
1786-RPCD
REPEATER DUAL COPPER MODULE
1786-RPCD
1786-RPCD
REPEATER DUAL COPPER MODULE
1786-RPCD
1786-RPCD
REPEATER DUAL COPPER MODULE
1786-RPCD
1786-RPA
1786-RPCD
REPEATER DUAL COPPER MODULE
1786-RPCD
Sealed
ControlNet
Media
TNC
T-tap
BNC
TNC
To Node
Enclosure
Standard ControlNet Media
Outside Enclosure
Standard Controlnet Media
Inside Enclosure
BNC
TNC
Harsh Environment
FLEX I/O
FLEX I/O
FLEX I/O
FLEX I/O
ACN
FLEX I/O
BNC
TNC
Sealed
ControlNet
Media
TNC
T-tap
IP67
Device
42347
Use only the hardware that we
provide with the connector. They are
the proper design and if you use
other hardware it can diminish the
integrity of your connection.