Configuring the KFC15/KFCD15 Module
4–5
Publication 17706.5.20 - June 1997
Configuring the Basic Parameters
The basic parameters are numbered zero to eight. The letters A and F
also come up on the seven-segment LEDs as you cycle through them
as described above. The letter A lets you into the sub-menu that
contains the advanced communication parameters. The settings
displayed beside letter F are the series and revision number of the
KFC15/KFCD15 module.
To configure the basic parameters:
1. Press the
VIEW
button to enter configuration mode.
2. Press
VIEW
as often as necessary or hold it down until the desired
parameter is reached.
3. Once the desired parameter is displayed, press the
DATA
button to
cycle through the available settings. Only valid selections for the
given parameter option are displayed.
4. When you have reached the desired data setting, you can press
VIEW
to display the next parameter.
5. When all relevant parameters have been set, press
VIEW
and
EXIT
together to save the parameter settings and return the module to
run mode.