ControlLogix Analog (10V) Output Module
11
Publication 1756-IN035C-EN-P - October 2000
Check the Indicators
The indicators show CAL status (green) and a bi-colored LED for
module "OK" (red/green).
During power up, an indicator test is done and the following occurs:
•
The "OK" indicator turns red for 1 second and then turns to
flashing green if it has passed the self-test.
This completes installation of the module. Use the information below
to remove the module.
LED
indicators:
This
display:
Means:
Take this action:
OK
Steady
green light
The outputs are in a normal
operating state.
None
OK
Flashing
green light
The module has passed
internal diagnostics but is not
actively controlled.
Configure the module.
OK
Flashing red
light
Previously established
communication has timed out.
Check controller and chassis
communication
OK
Steady red
light
The module must be replaced.
Replace the module.
CAL
Flashing
green light
The module is in calibration
mode.
None
20965-M
ANALOG OUTPUT
CAL
OK
AB Spares