Allen-Bradley armorstratix 5700, User Manual, Page: 154 / 458

154 Rockwell Automation Publication 1783-UM007I-EN-P - December 2017
Chapter 3 Configure Switch Features
Figure 20 - Switch Stack in a Ring Topology
Figure 21 - Switch Stack in a Linear Topology
Table 58 lists the supported features for horizontal stacking.
Features that are not listed in Table 58 are not supported. Unsupported
features include, but are not limited to, Device Manager, CIP, Layer 2 NAT,
PRP, and PTP.
32648-M
32649-M
Table 58 - Supported Features
Feature Type Support
Layer 2 features • Link status detection, speed, duplex
• Layer 2 learning and forwarding
• STP, MSTP, RSTP, BPDU Guard
• VLAN, VTP, DTP, VLAN Table
• CDP, LLDP
• UDLD
• EtherChannel (LACP and PAgP)
• Flex links
• IGMP snooping
• ARP
• REP ring convergence
Layer 3 features • ARP
• Static routes
• Layer 3 host configuration
Power over Ethernet (PoE) PoE is supported in Stack mode.
Traffic types • Layer 2 unicast
• Layer 2 multicast and broadcast
• Layer 3 unicast traffic
• Layer 3 multicast and broadcast