ArmorBlock MaXum I/O Cable Bases DeviceNet Powered Outputs Series B
7
Publication 1792D-IN001B-EN-P - September 2000
Attach the Module
1.
Position the module over the mounted cable base. Align the
three captive screws in the module with the accepting
receptacles in the base.
2.
Tighten the screws with a torque of 8 inch-pounds to secure
the module to the base.
The 1792D-CB12JP module is shown below.
IMPORTANT
Make sure you properly align the screws to
complete the connections between the module
contacts and the cable contacts cafeteria.
30834-M
Screws must be aligned
properly to complete
contact connections.
Contact
connections