Allen-Bradley 5094-AEN2TR Installation Instructions Manual Download Page 16

Allen-Bradley, FLEX 5000, Logix 5000, Rockwell Automation, Rockwell Software, and Studio 5000 Logix Designer are trademarks of Rockwell Automation, Inc.

EtherNet/IP is a trademark of ODVA, Inc.

Trademarks not belonging to Rockwell Automation are property of their respective companies.

Rockwell Otomasyon Ticaret A.Ş., Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400

Rockwell Automation maintains current product environmental information on its website at

http://www.rockwellautomation.com/rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.page

.

Publication 5094-IN001B-EN-P - May 2018

PN-485711

Supersedes Publication 5094-IN001A-EN-P - February 2018

Copyright © 2018 Rockwell Automation, Inc. All rights reserved. Printed in Singapore.

Rockwell Automation Support

Use the following resources to access support information.

Documentation Feedback

Your comments will help us serve your documentation needs better. If you have any suggestions on how to improve this document, complete the 
How Are We Doing? form at 

http://literature.rockwellautomation.com/idc/groups/literature/documents/du/ra-du002_-en-e.pdf

.

Technical Support Center

Knowledgebase Articles, How-to Videos, FAQs, Chat, User 
Forums, and Product Notification Updates.

https://rockwellautomation.custhelp.com/

 

Local Technical Support Phone Numbers

Locate the phone number for your country.

http://www.rockwellautomation.com/global/support/get-support-now.page

 

Direct Dial Codes

Find the Direct Dial Code for your product. Use the code to 
route your call directly to a technical support engineer.

http://www.rockwellautomation.com/global/support/direct-dial.page

 

Literature Library

Installation Instructions, Manuals, Brochures, and 
Technical Data.

http://www.rockwellautomation.com/global/literature-library/overview.page

 

Product Compatibility and Download 
Center (PCDC)

Get help determining how products interact, check 
features and capabilities, and find associated firmware.

http://www.rockwellautomation.com/global/support/pcdc.page

 

Summary of Contents for 5094-AEN2TR

















Reviews: