3
Approximate Dimensions [mm (in.)]
IMPORTANT
To avoid damage to the sensor or
mounting adaptor follow torque
specifications.
10.0
(0.40)
31.6 (1.24)
32.3 (1.27)
17.3
(0.68)
M18 X 1.0
thread
M18 Mounting Nut
33.0
(1.30)
35.0
(1.38)
14.0
(0.55)
25.4
(1.00)
26.4
(1.04)
3.0
(0.12)
20.0 (0.79)
20.6 (0.81)
16.0
(0.63)
Clearance for
M3 or #4--
(2 places)
Sensitivity
Adjustment
40 screw
Accessories
18 mm Snap-On Adaptor
The sensor can be mounted using an 18 mm snap-on adaptor
(60--AJS--18) as shown below. Line up the slotted hole with
the slotted hole on the sensor and snap on.
To remove the sensor from the adaptor, undo the snap by
using a flat screwdriver.
60--AJS--18
60--2657
60- BJS- L1—Mounting Bracket
12.0
(0.47)
18.6
(0.73)
33.0
(1.30)
14.0
(0.55)
24.0
(0.95)
8.0
(0.32)
15
°
R.25.4
(R.1.00)
60- BJS- L2—Mounting Bracket
12.0
(0.47)
33.0
(1.30)
14.0
(0.55)
38.9
(1.53)
18.6
(0.73)
8.0
(0.32)
R.25.4
(R.1.00)
20
°
10
°
Swivel/Tilt Mounting
60--BJS--L2
60--2619
Damage may occur to snap-on adaptor if torque above 15 in
•
lb is applied to the 18 mm mounting nut.
In high vibration applications, use mounting hardware supplied with the sensor to attach the 18 mm adaptor to the sensor.
Damage may occur to the sensor housing if torque above 2.5 in
•
lb is applied to the mounting screws.
