8
Rockwell Automation Publication VIEW-IN002C-EN-P - October 2018
Adapter Kit for PanelView 5000 and PanelView Plus 7 Performance Terminals
Prepare to Mount the Terminal
Mounting levers insert into the slots around the terminal bezel to secure the terminal in the
adapter plate. The number of mounting levers varies by terminal size. Each slot has six notches
with alignment marks that are locking positions for a mounting lever. The thickness of the panel
where the terminal is mounted determines the locking position that is required to maintain
NEMA, UL Type, and IP seals. See
Determine the Mounting Lever Lock Position on page 6
Mounting Lever Orientation and Lock Sequence
Mounting Lever Orientation and Lock Sequence
IMPORTANT
The mounting lever orientations that are shown are required to maintain NEMA, UL Type, and
IP seals. If you require a NEMA, UL Type, or IP seal, do not use a mounting lever in another
orientation than shown. See
Mounting Lever Orientation and Lock Sequence on page 8
3
1
2
4
5
6
6.5-in. Touch Only–6 Levers
2
4
9
7
11
5
6
12
8
10
3
1
15-in. Touch Only–12 Levers
10
14
11
13
12
9
15-in. Keypad and Touch–14 Levers
8
4
6
2
5
1
7
3
Back Side
of Terminal
3
1
10
6
8
7
5
10.4-in. Keypad and Touch,
12.1-in. Touch Only–10 Levers
2
4
9
Back Side of Terminal
Back Side of Terminal
4
7
2
5
6
1
8
3
6.5-in. Keypad and Touch–8 Levers
Back Side
of Terminal
Back Side of Terminal
2
4
8
6
7
5
3
1
10.4-in. Touch Only–8 Levers
Back Side
of Terminal
The arrows show the direction to rotate the
mounting lever for the final locking position.
