manualshive.com logo in svg

Allen-Bradley 2100-ENET, User Manual

Share
Download
Allen-Bradley 2100-ENET User Manual Download Page 41

Rockwell Automation Publication 2100-UM006A-EN-P - July 2013

41

Chapter

 5

Using the I/O

This chapter provides information and examples that explain how to control, 
configure, and monitor an E3 Plus module by using the configured I/O.  

About I/O Messaging

On CIP-based networks, including EtherNet/IP network, I/O connections are 
used to transfer the data that controls the E3 Plus module. I/O can also be used to 
transfer data to and from E3 Plus modules.

Chapter 3

 and 

Chapter 4

 discuss how to configure the adapter and controller on 

the network for these options. The 

Glossary

 defines the different options. This 

chapter discusses how to use I/O after you have configured the adapter and 
controller.

Understanding the I/O Image

The terms 

input

 and 

output

 are defined from the controller’s point of view. 

Therefore, output I/O is data that is produced by the controller and consumed by 
the E3 Plus module. Input I/O is status data that is produced by the E3 Plus 
module and consumed as input by the controller. The I/O image varies based on 
the following:

•

Configuration of the Input and Output Assemblies in the E3 Plus. For 
more information on this, see E3 and E3 Plus Solid-State Overload Relay 
User Manual, publication 

193-UM002.

• ControlLogix/CompactLogix Controllers only

—The E3 Plus module 

profile used in RSLogix 5000 software (E3 Plus module Add-on Profile in 
version 16 or later, Classic Profile in version 15, or Generic Profile in all 
versions).

Topic

Page

About I/O Messaging

41

Understanding the I/O Image

41

ControlLogix Example

44

ATTENTION: 

Risk of injury or equipment damage exists. The examples in this 

publication are intended solely for purposes of example. There are many 
variables and requirements with any application. Rockwell Automation does not 
assume responsibility or liability (to include intellectual property liability) for 
actual use of the examples shown in this publication. 

Summary of Contents for 2100-ENET













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands