4
FLEX I/O Digital Input and Output Modules with Diagnostics
Publication 1794-IN096D-EN-P - June 2018
ATTENTION:
This product is grounded through the DIN rail to chassis ground.
Use zinc plated chromate-passivated steel DIN rail to assure proper grounding.
The use of other DIN rail materials (for example, aluminum or plastic) that can
corrode, oxidize, or are poor conductors, can result in improper or intermittent
grounding. Secure DIN rail to mounting surface approximately every 200 mm
(7.8 in.) and use end-anchors appropriately. Be sure to ground the DIN rail
properly.
Refer to Industrial Automation Wiring and Grounding Guidelines, Rockwell
Automation publication
1770-4.1
, for more information
ATTENTION:
If this equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment may be impaired.
ATTENTION:
If this equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment may be impaired.
ATTENTION:
Read this document and the documents listed in the Additional
Resources section about installation, configuration, and operation of this
equipment before you install, configure, operate, or maintain this product.
Users are required to familiarize themselves with installation and wiring
instructions in addition to requirements of all applicable codes, laws, and
standards.
ATTENTION:
Installation, adjustments, putting into service, use, assembly,
disassembly, and maintenance are required to be carried out by suitably
trained personnel in accordance with applicable code of practice.
ATTENTION:
In case of malfunction or damage, no attempts at repair should
be made. The module should be returned to the manufacturer for repair. Do not
dismantle the module.
ATTENTION:
Use only a soft dry anti-static cloth to wipe down equipment. Do
not use any cleaning agents.
