EEPROM Memory Module
Product Data
3
Avoid touching the recessed conductors of the connector. Static charge can
alter memory. Skin oil and dirt can can corrode metallic surfaces,
inhibiting electrical contact.
Insert the EEPROM module into the bottom of the Mini-PLC-2/05
processor using the following steps:
1.
Place the processor on a bench top with the battery label up.
2.
Hold the EEPROM module with the catalog label up.
3.
Slide the EEPROM module into the rectangular opening in the
bottom of the processor, taking care to align the rails on the
EEPROM module with the mating rails in the opening.
4.
Gently but firmly push the EEPROM module into the opening until
its bottom flange is flush with the bottom of the processor.
Remove the EEPROM module using the following steps:
CAUTION: Do not remove EEPROM under power.
1.
Insert a coin or screwdriver blade into the opening between the
bottom flange of the EEPROM module and the bottom of the
processor.
2.
Pry the EEPROM module out far enough to grasp the bottom flange
with your fingers.
3.
Carefully remove the EEPROM module.
Handling the EEPROM
Module
Installation
Removal