Rockwell Automation Publication IASIMP-QS023B-EN-P - December 2012
29
Prepare the CompactLogix 5370 L3 Controller Hardware
Chapter 1
Make a DeviceNet Network Connection (Optional)
1.
Attach and lock the
1606-XLDNET8 DeviceNet
power supply to the DIN rail.
The power supply uses a locking
tab at the top that you push down
to secure it to the DIN rail.
2.
Assemble the DeviceNet network
cable system using the KwikLink
flat cable, terminators, and sealed
micro connectors for each device.
See instructions included
with devices.
3.
Wire a KwikLink QD Micro
Cordset to the 1769-SDN
connector.
Connect
To
Red
V+
White
CAN High
Bare
Shield
Blue
CAN Low
Black
V-
Input
AC 100-120/200-240V
N L
Isolat
e power bef
ore disc
onnec
ting
1606-XL
POWER SUPPL
Y
DC ok
Output
200W Limit
ed Powe
r
DC 24V / 8A
+ –
DC ok
AC 120V
AC 240V
Input
AC 100-12
0/200-24
0V
N L
Isolate p
ower befo
re discon
necting
1606-X
L
POWER SUPPL
Y
DC ok
Output
200W L
imited P
ower
DC 24V / 8A
+ –
DC o
k
AC 120V
AC 240V
To other device on
network
To other device on
network
1606-XLDNET8
DeviceNet Power Supply
KwikLink Sealed
Terminator
KwikLink Sealed
Terminator
KwikLink Sealed
Micro Connector
