122
Rockwell Automation Publication 1756-UM001O-EN-P - October 2014
Chapter 7
Manage Controller Communication
the backplane or a network. The size of the instruction depends on the data types
and message command that you program.
Messages use connection resources to send or receive data. Messages can leave the
connection open (cache) or closed when the message is done transmitting.
Each message uses one connection out of the controller, regardless of how many
devices are in the message path. To conserve connections, configure one message
to read from or write to multiple devices.
For more information about using messages, see these publications:
•
Logix5000 Controllers Messages, publication
•
Logix5000 Controllers General Instructions, publication
Determine Whether to Cache Message Connections
When you configure a MSG instruction, you can choose whether to cache the
connection.
to determine options for caching connections
.
Calculate Connection Use
The total connection requirements of a ControlLogix system include local and
remote connections.
Table 29 - Message Types
Message Type
Communication
Method
Connected Message
Message Can Be
Cached
CIP data table read or write
N/A
Configurable
Yes
PLC-2®, PLC-3®, PLC-5®, or SLC
(all types)
CIP
No
No
CIP with Source ID
No
No
DH+
Yes
Yes
CIP generic
N/A
Optional
(1)
(1) You can connect CIP generic messages. However, for most applications we recommend that you leave CIP generic messages
unconnected.
Yes
(2)
(2) Consider caching only if the target module requires a connection.
Block-transfer read or write
N/A
Yes
Yes
Table 30 - Options for Caching Connections
If the message executes
Then
Repeatedly
Cache the connection.
This keeps the connection open and optimizes execution time. Opening a
connection each time the message executes increases execution time.
Infrequently
Do not cache the connection.
This closes the connection upon completion of the message, which frees up that
connection for other uses.
TIP
Cached connections transfer data faster than uncached connections. The
controller only supports 32 cached messages.
Summary of Contents for 1756-L63XT
