ArmorPOINT RTD and Thermocouple Input Modules
5
Publication 1738-IN005B-EN-E - January 2013
Mount the I/O Base
Mount the I/O base on a wall or panel, using the screw holes provided in the base.
Mounting Diagram for ArmorPOINT Base with Adapter
Follow the instructions to install the mounting base.
1. Lay out the required points as shown above in the drilling dimension diagram.
2. Drill the necessary holes for M4 (#8) machine or self-tapping screws.
3. Mount the base using M4 (#8) screws.
4. Ground the system using the ground lug connection. The ground lug connection
is also a mounting hole.
Mounting Base
IMPORTANT
The module must be mounted on a grounded metal mounting plate or other
conductive surface.
102
(4.02)
56
(2.2)
46.25 (1.8)
51.9 (2)
Adapter
20.1 (0.8)
43769
Millimeters
(Inches)
51.9 (2)
51.9 (2)
20.1 (0.8)
Keyswitch
Ground lug connection
Latching mechanism
43675
