Allen-Bradley 1440-SDM02-01RA, User Manual, Page: 64 / 168

64 Rockwell Automation Publication 1440-UM001D-EN-P - September 2016
Chapter 2 Configure the XM-124 Standard Dynamic Measurement Module
Figure 35 - Application Help Dialog Box
For help on topics other than module configuration, consult the back cover of
this manual for contact information for Rockwell Automation® Support and
Installation Assistance.
Module Selection and Connection
The XM Serial Configuration Utility welcome screen is shown in Figure 36 .
The software version that is used for the XM-124 module can vary from the
figure, but the release number must be at least 7.0.0.
Figure 36 - 1XM Serial Configuration Utility Main Dialog Box
A closed connector icon indicates a computer connection to an XM-124
module, and the application allows only configuration of that specific module.
If no module is connected, as in
Figure 36 , the tool can be used to edit
configuration files for any type of module.