Allen-Bradley 1440-SDM02-01RA, User Manual, Page: 104 / 168

104 Rockwell Automation Publication 1440-UM001D-EN-P - September 2016
Chapter 3 Operate the Module
XM Services Table 22 defines services the XM-124 module supports. The table includes the
service codes, classes, instances, and attributes by their appropriate hexadecimal
codes. Use the Class Instance Editor in RSNetWorx™ software to execute these
services, as illustrated in this example.
Example
To save the configuration parameters to the nonvolatile memory (EEPROM),
enter the Class Instance Editor as shown.
Table 22 - XM Services
Action Service Code
(Hex) Class
(Hex) Instance Attribute Data
Transition to Run Mode Start
(06) Object (320) 1 None None
Transition to Program Mode Stop
(07) Object
(320) 1 None None
Save configuration to nonvolatile memory
(EEPROM) Save
(16) Object
(320) 1 None None
Delete saved configuration from nonvolatile
memory (EEPROM) Delete
(09) Object
(320) 1 None None
Reset a specific latched relay Reset
(05) Relay Object
(323) Relay number 1…C
for XM-440, 1…5 for
XM-12X, XM-320 and
XM-220, 1…8 for
XM-36X and XM-16X None None
Reset all latched relays Reset
(05) Relay Object
(323) 0 None None
Reset the Peak Speed (XM-12X only) Reset
(05) Speed Measurement Object
(325) 1, 2 for XM-220 None None
Close the virtual setpoint multiplier switch
to activate the alarm setpoint multipliers Other
(33) Discrete Input Point Object
(08) 1 None None
Open the virtual setpoint multiplier switch
to start the setpoint multiplier timers and
eventually cancel alarm setpoint
multiplication Other
(32) Discrete Input Point Object
(08) 1 None None
Choose the Save
service code.
Clear Send the attribute ID
and then enter the Class
(320
hex
) and Instance (1).
Click Execute to
initiate the action.