Allen-Bradley 1203-SSS, User Manual

Page: 13 / 44

Chapter
3
Configuring the Serial Converter
Objectives
Chapter 3 provides information about configuring the serial converter.
Factory-Default Settings
The factory-default settings of the serial converter are the following:
Accessing Parameters in a Converter
The serial converter stores parameters and other information in its own
non-volatile memory. You must, therefore, access the converter to view
and edit its parameters. The following table lists tools that you can use to
access the converter and edit its parameters.
Topic Page
Factory-Default Settings 3-1
Accessing Parameters in a Converter 3-1
Using DriveExplorer 3-2
Using Terminal Emulation Software 3-3
Key Strokes for Terminal Emulation Software 3-7
Setting the DF1 Address 3-7
Setting the Serial Port Rate 3-8
Setting the Fault Action 3-9
Resetting the Converter 3-10
Feature Default Setting Parameter
Node Address 1 P2 - [DF1 Address]
Serial Port Rate 9600 bps P3 - [Serial Port Rate]
Fault Action Fault P4 - [Comm Flt Action]
Tool Refer To
DriveExplorer software page 3-2 in this manual
Terminal emulation software page 3-3 in this manual
VT100-compatible terminal Documentation for the terminal
Allen-Bradley