ALLEN
&
HEATH
4
XONE:96 Guide:
Replacing Faders
REPLACING FADERS continued
[2]
[3]
[2]
[3]
[1]
Step 1:
•
Ensure power switch on the mixer’s rear panel is turned
OFF
.
•
Disconnect the mains cable from AC mains supply and mixer’s IEC socket.
Step 2:
•
Place the mixer face-down on a clean surface. Remove and retain 2 Torx screws securing the front panel
to the base of the mixer
[1]
.
•
Turn the mixer over. Remove and retain 6 Torx screws securing the front panel to the top and chassis
[2]
.
•
Loosen, but do not remove, 2 Torx screws securing the top panel to the mixer chassis
[3]
.
Step 3:
•
Lift the
front panel
forward away from the chassis, to access and, with care, disconnect the grey
harnesses connecting top panel to PHONES 2 assembly fixed to the front panel, as illustrated above
[4]
.
NOTE
:
•
Do not attempt to separate the top panel from the chassis
[1]
[2]
[2]
[4]
