Xone:23C
Quick
Start
Guide—Issue
1
6
ALLEN
&
HEATH
DVS Setup
XONE:23C
and the
Cross LE A&H Edition
can also be used with MIXVIBES timecode vinyl.
An internal modification is required to reconfigure the mixer’s soundcard routing.
see p19 of the
XONE:23C User Guide
for details.
Open the Preferences dialogue
Click on
Vinyl/CD
Activate
Control Deck 1
Activate
Control Deck 2
Click on the
Input:
drop-down menus
Select
Input 1/Input 2
for Deck 1
Select
Input 3/Input 4
for Deck 2
Click the
Control Media:
drop-down
Select
MV Vinyl
Click the
Calibrate
buttons.
If you use turntables, Cross LE automatically sets the input gain level to an appropriate gain level for optimizing the decoding
quality. If you use timecode CDs you may need to reduce the gain manually
Close the Preferences window
Enable Control Decks
Hover over the top right of the waveform view to display
Control Deck
options.
To control
Player A
from timecode source connected to Input 1*
click
Use Control Deck 1
To control
Player B
from a timecode source connected to Input 3*
click
Use Control Deck 2
*If you use timecode to control audio, or set the Cross LE Players for LINE IN
Check the INPUT level for the corresponding XONE:23C channel (1 or 3) is set at minimum.
This is important to ensure the signal only routes to the MIX via soundcard channel outputs.
