3
RPS11 Power Supply
INTRODUCING THE RPS11
The RPS11 is a linear power supply which, like other linear supplies, produces DC voltages by rectifying, smoothing and
regulating AC voltages from the secondary windings of a mains transformer.
Allen & Heath mixing consoles employ a number of DC voltage supply levels in their operation and these are provided at the
output of the power supply unit.
IMPORTANT:
Please read this manual carefully before connecting your
RPS11 power supply to the mains.
IMPORTANT
:
Any changes or modifications to the equipment not approved by Allen & Heath could void the compliance of
the console and therefore the users authority to operate it.
Precautions and Safety instructions
General Precautions
Avoid storing or using the RPS11 in conditions of excessive heat or cold, or in positions where it is likely to be subjected to
vibration, dust or moisture. Do not use any liquids to clean the exterior of the unit: a soft, dry cloth or brush is ideal.
SOLVENTS MAY CAUSE DAMAGE TO PAINT OR PLASTIC PARTS
Handling and Transport
The RPS11 is supplied in a specially designed cardboard box. If it is necessary to move the unit any distance after installation, it
is recommended that this carton is used to protect it. Be sure to disconnect all cabling before moving. If the RPS11 is to be moved
regularly (e.g. touring) it is recommended that it is installed in a foam lined case. At all times avoid applying excessive force to
any switches or connectors.
This product complies with the European Electromagnetic Compatibility directives 89/336/EEC & 92/31/EEC
and the European Low Voltage directive 73/23/EEC & 93/68/EEC.
ON
OFF
T 10A 250V 20mm
CAUTION: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE
ATTENTION: REMPLACER LE FUSIBLE AVEC UN DES MEMES
REPLACE FUSE WITH SAME TYPE AND RATING.
DC FUSES
CARACTERISTIQUES.
V+
V-
ALLOW ADEQUATE VENTILATION AROUND THE UNIT.
SEE INSTALLATION INSTRUCTIONS BEFORE CONNECTING TO THE SUPPLY.
DO NOT OBSTRUCT VENTILATION OPENINGS.
