background image

iDR MixRack

  Getting Started Guide 

 AP7445 iss.4 

Front Panel 

 

Mic/Line inputs

   High performance, recallable 

analogue preamps for balanced or unbalanced 
microphone and line level signals.  Gain, Pad 
and 48V are digitally controlled within the 

preamp.

 

Digital Trim and Polarity is available 

within the DSP channel. 

Inputs are identified by Slot (card position) and 
Socket (number), for example 

A1

 or 

C8

.  Any 

input can be patched to any DSP channel 

using the 

PREAMP

 screen. 

Line outputs

  Line level, balanced XLR 

outputs.  Nominal level +4dBu with +22dBu 
maximum pro18dB headroom. 

iLive signals can be patched to any output 

socket using the 

OUTPUTS

 screen.  The 

outputs are relay protected to prevent power 
on or off thumps. 

PL-Anet

  RS485 connection for Allen & Heath 

PL Series remote controllers.  Several may be 
daisy chained together or routed individually 
via the PL-9 PL-Anet hub.  PL controls can be 

assigned using the 

SURFACE SETUP

 screen 

or Editor software. 

MIDI

  IN and OUT sockets.  

MIDI is tunnelled via ACE™ 
or Network to the MIDI port 
at the Surface.  For more 

information about MIDI 
refer to the iLive MIDI 
Specification. 

Network

  Built-in 3 port switch. Connect one or more laptops 

running iLive Editor, a wireless router, other iLive systems or 
external network, or link control to a Surface not equipped 
with ACE™.  All devices on the network must have 

compatible TCP/IP addresses.  A recessed switch lets you 
reset the network settings to factory default. 

ACE™ MixRack to Surface link

  Also used when linking a 

Slave MixRack to a Master in Dual-Rack expansion mode.  A 
single CAT5 cable links audio and control.  You do not need 
a separate Network cable because control is bridged over 

the ACE™ cable between MixRack and Surface.   

PHONES

  ¼” stereo socket and level control 

for the built-in headphone amplifier.  The 
output follows the PAFL selection. 

Port B audio network option slot

  Fit one of 

the option cards available for system 
expansion, digital mic splitting, recording and 
distributed audio networking.  Capable of bi-

directional 64 channels, 48kHz sampling rate.  
Current options include ACE™, Dante, 
EtherSound, MADI, MMO, Waves.  Refer to the 
A&H web site for more on the available options. 

SYSTEM LOCK

  indicates MixRack digital audio sync lock. 

Rack Ears

  Fit into a 

19” rack or flightcase. 

PL-9 hub 

AES digital out option

    Shown 

fitted in the last card position.  
Each socket handles two signals, 
in this case 5-6 and 7-8. 

Summary of Contents for iDR MixRack













Reviews: