CC-7, CC-10 Getting Started Guide
AP12698 Issue 1
Configuration
An installer, integrator or system admin can exit the app to change the touch
panel settings such as IP address or brightness, or to update the software.
Swipe right from the left border to access the app settings and touch
Quit
. Enter
the factory unlock PIN code:
8789
.
The
Settings
app gives access to several settings for the touch panel, for
example:
•
Network settings
–
select
Ethernet
and enter a static IP address,
subnet mask and gateway if required. Factory default is automatic IP
address (DHCP).
•
Scheduled sleep
–
select
Schedule / Set Scheduled sleep On/Off
Clocks
and set the Time and Repeat options as desired.
•
Language
–
select
System / Language & Input
. This applies to the
Android OS only, not to the Custom Control app.
To adjust the brightness of the screen, swipe down from the top of the screen,
touch
Brightness
and slide the control to adjust.
Auto
adjusts the brightness
automatically based on the ambient light.
Software updates
To update the Custom Control app:
•
Download the kiosk version of the app from
CustomControllerApp-
64k.apk
installer file on a USB drive.
•
Insert the USB drive into the USB port of the touch panel.
•
Exit the app as described in the section above, open the
Files
app,
locate and launch the .apk installer.
•
Follow the instructions on screen.
CC-7 and CC-10 require the kiosk version of Custom Control,
V1.20
or higher. Only install updates from the Allen & Heath
website. Do not use the public version of the Custom Control
app from the Google Play store.
Check
Custom Control kiosk app and any updates for the CC-7 and
CC-10 panels.
