AHM-16/32 Getting Started Guide
8
AP12764 Issue 1
4.
Rear Panel
1.
Mic/Line Inputs
Recallable preamps on Phoenix connectors, for balanced or unbalanced microphone
and line level signals. Gain, Pad and 48V are digitally controlled within the preamp.
Any socket can be patched to any of the Input Channels.
Use the provided 3-pin Phoenix connectors with strain relief for optimal cable
management.
2.
Line Outputs
Assignable line level, balanced outputs on Phoenix connectors. Nominal level +4dBu.
The outputs are relay protected to prevent power on or off thumps.
Use the provided 3-pin Phoenix connectors with strain relief for optimal cable
management.
3.
Mains
IEC inlet with universal power supply (100-240V AC, 50-60Hz).
4.
I/O Port
Audio interface port providing up to 128x128 I/O. Fit one of the option cards available
for system expansion, distributed audio networking or system integration. Refer to
for a list of available option cards.
For Dante audio networking, use the M-SQ-DANT32 or M-SQ-DANT64 (SQ Dante
V2) card, not the original M-SQ-DANTE card.
The I/O Port panel is also used to access DIP switch 6 for network reset of the
unit to default settings. Reset occurs with switch 6 in the On position at power
up. After 10 seconds, turn off the unit and move the switch back to the Off
position. Do not alter the position of the other DIP switches.
1
2
3
4
5
6
