SPECIAL INSTRUCTIONS FOR X571 LOCK
TO CORRECT OUT OF TIME CONDITION
BUTTON DOES NOT OPERATE...
OR KEY WILL NOT ROTATE CLOCKWISE...
THEN THE DOGGING BAR IS OUT OF "TIMING"
CARE MUST BE TAKEN NOT TO ROTATE EITHER
KNOB SPINDLE WHEN CYLINDER HAS BEEN REMOVED.
TO CORRECT—
1. TAKE OFF INNER KNOB AND ROSE,
AND REMOVE LOCK FROM DOOR.
2. REMOVE OUTSIDE KNOB AND CYLINDER
ASSEMBLY.
3. PLACE DOGGING BAR IN POSITION AS
ILLUSTRATED BELOW.
4. LOCK MUST BE IN THE UNLOCKED POSITION
BEFORE KNOB IS INSTALLED.
5. REPLACE OUTER KNOB AND CYLINDER ASSEMBLY
PER INSTRUCTIONS PACKAGED WITH LOCK.
6. INSTALL LOCK ON DOOR.
INNER SPINDLE
OUTER SPINDLE
CORRECT POSITION OF
NOTCH IN DOGGING BAR
DOOR CENTER
©
2015 Allegion
Printed in U.S.A
002376-000-70 Rev. 05/15-d
