SKIP
Go to PRESET submenu to choose “SKIP”, change SKIP to YES, then press PROG key to
skip received channel, this function is used to skip those channel with bad effect. If change
SKIP to NO, then will not skip that channel.
PRESET
----------------------------------------------------
PROG 06
SKIP NO
SWAP 06
AUTO
MANUAL
FINE
BAND UHF
MANUAL
Go to PRESET submenu to choose “ MANUAL”, then press
key to manual search
backward or forward, it will stop searching after finishing.
PRESET
----------------------------------------------------
PROG 06
SKIP NO
SWAP 06
AUTO
MANUAL
FINE
BAND UHF
PAGE 26
PROG
1.
Press number key 1-10 to channel 1-10. As to those channel exceeding 10, may press
“10+” key to choose “- -“ two digit number display, then press number key to input 10
digit number, then press number key to input single digit.
2.
Press CH+ or CH- key to choose Next or Previous channel. Or go to PRESET submenu
to choose “PROG”, then press
key to choose Previous or Next channel.
SWAP
Go to PRESET submenu to choose “SWAP”, press
key to change swapped channel.