Allavino YHWR305 Instruction Manual Download Page 7

www.allavino.com 

1-888-980-4809 

Racking Configuration 

 

Disperse your bottles evenly throughout the unit so as not to concentrate weight in any one area. This also helps to 
provide an even temperature range throughout the unit. Make sure that bottles are not all grouped together either at 
the top or bottom of the cabinet. The maximum capacity per shelf is 95 lbs. Never try to pull out more than one rolling 
shelf at a time as it can cause the appliance to tip forward. 

 

The Allavino Wine Cellar has wood presentation shelves that glide smoothly on ball-bearing tracks which allow easy 
access to your entire collection. The top 10 shelves will hold up to 28 standard 750ml wine bottles each.  The bottom 
shelf can hold larger magnum bottles or up to 25 standard bottles, affording you easy access to up to 305 of your 
favorite bottles.  The overall bottle capacity will vary depending upon the size of your bottles. If you have larger 
diameter bottles, you can remove a shelf to accommodate them, but that will affect your overall bottle capacity. 

 

 

 

 

 

You can remove a shelf to accommodate larger diameter bottles on the shelf below it.  To remove a shelf, pull it out as 
far as you can.  There are levers on each side of the shelf near the rollers.  Left the lever on the left hand side and push 
down the lever on the right hand side to remove the shelf from the tracks. 
 
 

 

 
 
 
 
 
 

 
This wine cellar has 10 shelves that can hold up to 
28 bottles each and the bottom shelf can either hold 
larger diameter bottles or hold 25 bottles by 
stacking three rows of standard size bottles for a 
maximum bottle capacity of 305 bottles.  The 
maximum capacity is based on the standard 
Bordeaux size bottle.  Your total bottle capacity may 
vary depending upon the size of the bottles in your 
collection. 

 

Summary of Contents for YHWR305















Reviews: