6.
Now assemble all four sets of slide rails. Using the same gentle tapping method as
before, insert the male end of each rail into the female end of its matching rail. Do not
insert into the end with a slot. Insert into the end with the notch (see example below).
7.
Next, measure the distance between your support rails.
Install 2 sets of bolts, washers and strut “T” nuts roughly the same distance apart as
your support rails.
Width of Support Rails
Place each bolt with the washer through the bottom of the slide rail and loosely hand-tighten it
into the strut “T” nut.
At this point, we suggest installing the hardware into all four slide rails using the same spacing.
