3
ELECTRICAL TEST, MAINTENANCE & STORAGE
WARNING: THIS IS A CLASS 1 TESTED APPLIANCE
•
When earth bond testing, the readings should be 0.10M
Ω
and below.
•
Do Not
perform a flash test, as this will reduce the life of
the lamps.
•
Do Not
use abrasive cleaners or polishes.
•
Always switch
‘off’
, disconnect the heater from the power
supply and allow cooling for recommended time before
cleaning. Clean the heater with a damp cloth.
•
When not in use, store in a dry suitable environment
(preferably in the original carton to prevent damage).
TROUBLE SHOOTING
FAULT DESCRIPTION
SUGGESTED SOLUTION
HEATER DOES
NOT OPERATE
•
Check power supply.
•
Check lamp(s) for damage
or misalignment.
•
Check all wiring
connections.
OTHERS
Consult a qualified electrician
or contact
Rhino
(
contact
details opposite
).
SPECIFICATION DATA
PART NUMBER
110V - H029300
230V - H029400
POWER REQUIREMENT
110V~ or 230V~, 50Hz
INFRARED HALOGEN
LAMP
(
110V & 230V
)
Wattage - 2 x 1.4kW (± 5%)
Overall Length - 349mm
Average Life - 5000Hrs
POWER CORD LENGTH
3 Metres
PLUG
110V - 32A (
BS 4343/
BS 60309
)
230V - 13A UK 3 pin
(
BS 1363/A
) with 13A
fuse (
BS 1362
)
POWER CORD
110V - Yellow 3G 4.0mm²
H07 VV-F
230V - Black 3G 1.5mm²
H07 RN-F
DIMENSIONS (
LxWxH – Heater
cassette in upright position, inc.
wheels & cass. adj. knob
)
500 x 460 x 1000mm
WEIGHT
14.3Kg
OPERATING
TEMPERATURE
-20ºC to +40ºC