background image

!

3.Starting and Stopping

Warning

Before starting the mower, check within the blade area for any foreign 

objects and remove them.

Do not operate the mower on areas other than turf surfaces.The mower 

should be sitting on its wheels on a level part of lawn before starting 

operation.

(1)To start and operate the mower,

lever     back 

(2)

(3)The mower may be restarted at any time with the same procedure. 

First turn on the red on/off switch     on the

main unit,then press the safety button    with one hand and 

toward the handle grip with another hand.

To stop the mower,just release the level   ,the motor will switch off, then 

turn off the on/off switch     on the main unit.

 pull the starting

13

2

3

3

13

4.Reset Button

The reset button     on the main body of the machine is to prevent any damage 
occurring to the battery or the motor due to a current overload, such as from the 
blade jamming.

14

To restart the mower wait for a few seconds then press the reset button so that

 it is level.

If the Reset button     operates then following actions are recommended:

14

(1) Make a first cut with a high cutting height then make a second cut with a lower 

cutting height.(See cutting height adjustment section on previous page)

(2) Push the Mower more slowly.
(3)Check the blade is correctly adjusted so the grass is cutting cleanly.

5.Mowing

To obtain a clean cut, push the mower in straight lines (passes) at a deliberate

 walking pace. Overlap the passes to even the cut and to avoid any uncut strips. 

If you hear the motor in the mower change pitch dramatically while mowing, it 
may be overloaded.

Check to see if the grass is very thick or long, A first cut with height set higher 
will help reduce the load on the motor.(See Cutting Height Adjustment section).

Push the mower more slowly when cutting thick grass.

6. Mowing Using the Grass Catcher (Optional Accessory)

The grass catcher collects the clippings as it mows. It attaches at the grass catcher
hooks on the mower and by the strap to the mower handle. Mow using the same 

 procedure as for normal mowing (above).  

10

Summary of Contents for APT1216














Reviews: