Athena Classic
IMPORTANT!
Pages #4 and #9 in the Athena Classic manual
refers to the Flow Valve. This valve is no longer included with
this ionizer and your ionizer will not match this photo..
This
step is no longer needed.
Your ionizer no longer comes with 2 Calcium Inserts, but with
1
Calcium Insert
for Soft Water
and
1
Scale Guard Insert
for Hard Water
to be
placed in Mineral Port.
MANUAL UPDATES
A dust pre
-
filter is included with all ionizer models. The dust pre
-
filter is
pre
-
installed on the
1/4”
tubing that should be installed at the tap water
inlet. See photos below.
2.
Install at Tap Water
Inlet.
3. Installed.
Dust Pre
-
Filter
1.
Dust Pre
-
Filter
comes attached.
Quick Connect Fitting Release
Install:
Insert
1/4”
tubing into Quick Connect Fitting
and
PUSH IN
firmly until it can
’
t go further.
Removal:
Hold Quick Connect Fitting end with thumb and
index finger. Press in on the ring while pulling out
the
1/4”
tubing in opposite direction.
Install
Removal
Press here
Read Me First!
Protect Your Investment
Step 1
-
Read the
“
Read Me First
”
Step 2
-
Watch Installation Video
Refer to video link in
“
Read Me First
”
Step 3
-
Test Your Tap Water
Hard Water Test Strip included
Refer to instructions
Step 4
-
Install Your Ionizer
Step 5
-
Activate Your Warranty
Step 6
-
Enjoy Your Water!
© AlkaViva, LLC
-
January 2017
