AMS 2 1 0 0
AMS 2100S
TO OPERATE-POWER / WATER SUPPLY
Plug in the AC power plug firmly.
Turn on the main power switch on the right side.
▶
The unit will beep and the LCD screen will display
the initial modes.
Main Power Switch
Slowly rotate the operation knob clockwise to have
the water inflow into the unit.
Notice the water inflow rate as shown in the screen and
adjust if necessary.
▶
The water inflow rate is indicated in numerical form.
▶
The optimum inflow rate is 2.0-2.5 liters/min.
▶
Adjust the water inflow rate by using the operation knob.
▶
The screen backlight color will be varied according to the chosen function
and pH level.
< The wheel begins spinning round >
TO STOP THE OPERATION
Rotate the operation knob counterclockwise
to the (OFF) position.
The unit will return to standby made status.
Filter Life
Indication after water flow direction is changed
Level
Indication of the changing water flow direction
<This is to indicate
it’s changing>
※
Occasionally there is a "tick" sounding noise from inside the unit after stopping the operation.
This is not a malfunction, but the normal sound when the drain valve is opened and closed.
Therm/Flow
lnlet water
Temperature
lndcation
Water lnflow
Rate lndication
lonize
Level
lonize
Level
HOW
�
�
�
�
�
�
14
HOW
Filter Life
Therm/Flow
Alkaline
Alkaline
<Standby status>
Therm/Flow
lonize
lonize
Level
Alkaline
<Initial modes>
Alkaline
Filter Life
ON
Therm/Flow
OFF
Fuse Holder
Filter Life
HOW TO OPERATE
Summary of Contents for AMS2100
Page 22: ...21 AMS 2 1 0 0 AMS 2100S...
