3.3 Stand – Alone Operation
i. Using
Master/Slave
Mode
When making synchronous operation for multiple fixtures requires that they be connected on
a data link and one for the fixture set as master unit and rest set as slave unit. Only one fixture
can be set as master unit and rest of salve unit mimic behavior of master.
IMPORTANT
Before using Master/Slave mode, fixtures must be disconnected from DMX controller. Data
collision may occur if not disconnected.
1. Press [MODE] button to find
menu.
2. Use [UP] [DOWN] button to set fixture as master
or slave
unit.
Note:
Unit set as master blue LED will light up as indication on control panel.
ii.
Manual Color Mixing
Make color adjustment manually using this mode. It provides control for red, green, blue and
7 preset colors are available with dimming control.
1.
Use [MODE] button to find
menu.
2.
Press [F/S] button to scroll through submenu and make adjustment using [UP] [DOWN]
button.
3.
Press [F/S] button again to store setting.
____________________________________________________________________________
VersaBar 270 User Manual Page 15 of19
