Alkalite Tracpod 84 User Manual Download Page 5

1.3 Safety 

Instructions 

 

 CAUTION 

UNPLUG MAINS BEFORE INSTALLING OR WIRING THE FIXTURE 

 

User must be qualified to be involved with installation and maintenance of this product. User 

must follow the safety instruction and warning notes written in this manual. 

 

 CAUTION 

NEVER LOOK DIRECTLY INTO THE LIGHT SOURCE 

                                                                                                             

IMPORTANT 

z

 

For indoor use only 

z

 Keep 

dry 

z

 

Install only in well ventilated areas 

z

 

Do not attempt to open the controller or fixture, no user serviceable parts inside. 

z

 

Before attaching the device, make sure the installation surface can hold a minimum point 

load of ten times the device’s weight.   

 

 

  Installation                                                                                                 

 

2.1 Connection to the mains 

 

i. AC 

Power 

 

Tracpod 84 is available in AC100-240V 50-60HZ and is supplied to match your local voltage 

and frequency.   

 

ii. Replacing 

Plug 

 

The power cable must be fitted with a grounding-type cord cap (earthed type mains plug) that 

fits your power distribution system. 

____________________________________________________________________________ 

Page 4 of 13                                                   Tracpod 84 User Manual 

Summary of Contents for Tracpod 84
















Reviews: