37
Setting Up the Web Server
0
1.
In the options menu, click
Setup
to open the System Settings
window. (Refer to Figure 34)
NOTE:
IP address is automatically aquired from network settings.
Figure 34.
Web Service
2.
Enter a Port number, such as
7788
into the Web Server Port field.
3.
Enter the web server password in the password field. This is the
administrator password of the computer running the USB WiGuard
Software.
4.
If you are using a multimedia server, enter
8080
in the MMS Server
Port field and set the MMS Server Channel field to Enabled.
5.
Click
Apply
to
approve the setting.
6.
Click
Confirm
to exit the System Settings window.
NOTE:
Must have priveleges to change the network settings.
2
5
6
3
4
