Alinket
ALXB10x User Manual
Alinket Electronic Technology (Shanghai) Co.,Ltd.
All rights reserved. E-mail
：
5.2.5.
Roaming parameter configuration
This part is used for configuring parameters specified below:
Trigger
：
The threshold of triggering roaming function. When the signal strength of
ALXB10x is lower than this value, the scanning behavior of ALXB10x roaming is
triggered. Range of parameter: -1~-100;
Delta
：
When the signal strength of new AP≥Delta
，
triggering the roaming
switch. Range of parameter: 1~100
；
Period
：
The time interval of roaming scan. Range of parameter: 1~100
；
After filling in the parameters, click “Write”, then click “OK” on the pop-up window. To ensure the
success of configuration, please make sure to click “Software Reset” to restart ALXB10x. Before
setting changes, you can also click "Read" to Read the default roaming parameter values, as
shown below:
