Alinket
ALXB10x User Manual
Alinket Electronic Technology (Shanghai) Co.,Ltd.
All rights reserved. E-mail
：
5.1.2.
Wireless configuration mode
Once ALXB10x is powered on, it will starts a built-in Soft AP. User have to connect to this Soft AP
to configure ALXB10x wirelessly. See below figure for the connection method:
1) Power the ALXB10x through micro USB port;
2) Connect ALXB10x with the customer device with RJ45 network cable. ALXB10x will
automatically obtain the MAC address of the customer device and take it as
the SSID of its
own Soft AP
(Broadcast name is hidden, SSID format
is as “AABBCCDDEEFF”, encryption
mode is
“open”);
3) Use the computer which is installed ALXB10x Configuration Tool to connect to the Soft AP of
ALXB10x. Since the SSID is hidden, it is necessary to select "hidden network" and manually
input the SSID of ALXB10x wireless AP;
4) Launch the ALXB10x Configuration Tool for Configuration. After Configuration, click "Software
Reset" to restart ALXB10x
5) ALXB10x will automatically connect to the target wireless router to help customers realize
wireless networking, as shown in the figure below:
