21
7
8
tone-burst tones
1.
Press and hold
FUNC
key for over 2 seconds to enter setting menu.
2.
Press
P3
/
P4
key to choose No.22
menu, LCD displays "
TB--1750
".
3.
Press
/
to select the
desired tone frequency. Available tones
are 1000,1450,1750 and 2100Hz.
4.
Press
P2
key to confirm the selection and exit.
Display Mode Setup
There are 3 different display modes: FrMemory mode, Memory
mode & Frequency mode + Memory mode.
1.
Press and hold
FUNC
key for over 2 seconds to enter setting menu.
2.
Press
P3
/
P4
key to choose No.23 menu, LCD displays "
DSP—
FR
".
3.
Press
/
to select the desired mode.
FR:
Frequency mode+Memory mode.
CH:
Memory mode.
NM:
Frequency mode + Memory mode (if
it is named a name tag, name tag will be
shown).
4.
Press
P2
key to confirm and exit.
FUNCTION MENU SETUP
This function may not be available in dealer-programmed units.
4.
Press
P2
key to confirm the selection and exit.
PIN Setup(
Useless if PIN is not assigned
)
Enable this function, you have to insert a matching PIN to enter into
normal status when radio is turned on.(The PIN can be assigend by
programming software only.)
1.
Press and hold
FUNC
key for over 2
seconds to enter setting menu.
2.
Press
P3
/
P4
key to choose No.24
menu, LCD displays "
CODE-OF
".
3.
Press
/
to enable/disable
Pin setup.
ON: Turn on Pin setup
OFF:Turn off Pin setup
4.
Press
P2
key to confirm and exit.
Address list
You store desired ID and corresponding ID name in address list. The
LCD displays ID corresponding name if radio received ANI calling and
find matching ID in address list.
1.
Press and hold
FUNC
key for over 2 seconds to enter general
setting menu.
2.
Press
P3
/
P4
key to choose No.25
menu, LCD displays "
BOOK
".
3.
Press
P2
to enter into ID setting, press
P3
/
P4
to select the desired group
(00-127, total is 128 group ID). Press
/
to select desired number,
press
P3
confirm and move cursor to
next edition, press P4 return to forward
edition, press
to clear out all digits.
