22
8
Display iiiumination color setting
This is to select the display illumination color.
Press and hold
1.
/
key for over 2 seconds to enter setting menu.
Press
2.
/
key to choose No.22 menu, LCD displays "
COL--
ORG
".
Turn Main Dial to select the desired color. Available colors are:
3.
ORG-Orange
,
PUR-Purple
, and
BLU-Blue
.
Press
4.
key to confirm and exit.
Scan resume Time Setup
There are 3 kinds of scan resume conditions.
Press and hold
1.
key for over 2
seconds to enter setting menu.
Press
2.
/
key to choose No.23
menu, LCD displays "
SCAN--TO
".
Turn Main Dial to select the desired
3.
Scan Resume Time.
TO:
Timed Scan, it resumes scanning
after receiving 5 seconds or when the
signal is gone, which ever faster.
CO:
Busy Scan, it resumes scanning when the receiving signal is
gone.
SE:
Stops scanning when a signal is received.
Press
4.
key to confirm the selection and exit.
LCD dimmer
Press and hold
1.
key for over 2 seconds to enter setting menu.
tone-burst tones
Press and hold
1.
key for over 2 seconds to enter setting menu.
Press
2.
/
key to choose No.25
menu, LCD displays"TB--1750".
Turn Main Dial to select the desired
3.
tone frequency. Available tones are
1000,1450,1750 and 2100Hz.
Press
4.
key to confirm the selection and exit.
Display Mode Setup
There are 3 different dispaly modes: FrMemory mode,
Channel mode&Name Tag mode.
Press and hold
1.
key for over 2 seconds to enter setting menu.
Press
2.
/
key to choose No.26 menu, LCD displays"DSP—
FR".
Turn Main Dial to select the desired mode.
3.
FR: FrMemory mode.
CH:Channel mode.
NM:Name Tag mode,if channel
not named, it displays Frequency +
Memory mode.
Press
4.
key to confirm and exit.
General Setting
Press
2.
/
key to choose No.24
menu, LCD displays "
LAMP--25
"
Turn Main Dial to select the desired
3.
LCD brightness; 1 to turn off, 32 to the brightest.
Press
4.
key to confirm and exit.
