Alinco DR-135 Mk III, User Manual

Page: 5 / 24

5/24
2.3 Connecting the parts
1.
Connect the Radio Kit Serial Cable to the Laptop serial connector (or
USB-to-Serial adaptor if required, not supplied).
2.
Connect the Printer USB cable to the designated Laptop USB port.
3.
Put the Antenna on top of a metal surface, such as the ARK.
4.
Connect the Antenna Coax to the radio antenna connector.
5.
Connect the Laptop power module.
6.
Connect the Printer power module.
7.
Plug the Radio Kit, Laptop, and Printer into the extension cable/power
strip.
8.
Start the Generator if available.
2.4 Power on sequence
1.
Turn on the Laptop. Verify the Laptop boots up.
2.
Turn on the Printer. Verify the printer powers on.
3.
Turn on the Radio Power Supply

. Verify the On/Off switch
illuminates.
4.
Turn on the TNC

. Verify the TNC Power LED illuminates.
5.
Turn on the Radio

Verify the Radio display comes on.
See Section 5 Alinco Radio Setup for details.
Packet Radio Kit, Front view