Alinco DJ-X7E, Instruction Manual, Page: 9 / 42

9
2
Accessories
■
Receiving while charging with AC adapter
●
Charging battery
1.Install the battery pack to the
receiver.
2.Plug the AC adapter to the
DC-IN jack of the receiver.
3.Plug the power plug to an
outlet.
(EDC-128 has different shape.)
Regardless of whether the power ON or OFF of the receiver, it
will start charging.
When the receiver is OFF state, the low battery indicator shown
below blinks and the RX lamp illuminates during charge. Once
it is fully charged, the lamp will go off.
Caution
•
Never charge batteries of other manufacturers. Never
plug the provided AC adapter to other devices, either.
• If you should short-circuit the terminals with metal objects
and the like, it may cause damage to both the receiver
and the battery.
•
Be sure to connect the AC adapter after mounting the
battery pack to the receiver. Otherwise, the battery
won't be charged.
• Be sure to unplug the AC adapter when it is not in
use.
• The required charging time depends on the condition
of the battery pack.
• The battery won't be charged if the voltage from an
outlet is extremely low.
■
Low battery indicator
•
Battery consumption level may change depending on the
surrounding temperature or the conditions of use.
• Charge the battery when the indicator appears.
• This is not an indicator for battery life remaining.
Low battery indicator
Indicates the charge level is
low.
NOTE
AC adapter plug
Power plug