Alinco DJ-X3, Service Manual, Page: 29 / 35

29
Item Adjustment Content Specification
SQL
Adjustment
( BP5 ) SQL level 1 Adjustment Display : 5n1
Input the 435.13MHz of –6dBu (standard modulation), and
press the SCAN key.
Check if can hear the BEEP sound.
SQL level 5 Adjustment Display : 5nF
Input the 435.13MHz of 0dBu (standard modulation), and
press the SCAN key.
Check if can hear the BEEP sound.
SQL
Adjustment
( BP6 ) SQL level 1 Adjustment Display : 6n1
Input the 797.1MHz of –4dBu (standard modulation), and
press the SCAN key.
Check if can hear the BEEP sound.
SQL level 5 Adjustment Display : 6nF
Input the 797.1MHz of 2dBu (standard modulation), and
press the SCAN key.
Check if can hear the BEEP sound.
S Meter
Adjustment
( BP3 ) S Meter level 1 Adjustment Display : 3S1
Input the 145.13MHz of –5dBu (standard modulation), and
press the SCAN key.
Check if can hear the BEEP sound.
S Meter level 5 Adjustment Display : 3SF
Input the 145.13MHz of 15dBu (standard modulation), and
press the SCAN key.
Check if can hear the BEEP sound.
SQL
Adjustment
( WFM ) SQL level 1 Adjustment Display : Wn1
Input the 90.5MHz of 6dBu which modulation is 22.5KHz, and
press the SCAN key.
Check if can hear the BEEP sound.
SQL level 5 Adjustment Display : WnF
Input the 90.5MHz of 18dBu which modulation is 22.5KHz,
and press the SCAN key.
Check if can hear the BEEP sound.
S Meter
Adjustment
( WFM ) S Meter level 1 Adjustment Display : WS1
Input the 90.5MHz of 13dBu which modulation is 22.5KHz,
and press the SCAN key.
Check if can hear the BEEP sound.
S Meter level 5 Adjustment Display : WSF
Input the 90.5MHz of 20dBu which modulation is 22.5KHz,
and press the SCAN key.
Check if can hear the BEEP sound.
Battery
Indication
Setting
Turn on the Reduction Battery Character
Display : dSpv
Change the input voltage from 4.5V to 3.8V, and press the
SCAN key.
Check if can hear the BEEP sound.
( After checking return the voltage to 4.5V.)
After finishing all adjustment items, press the FUNC key, and
then change the mode from adjustment mood.
( If want to change the mode before finish the adjustment,
press the FUNC key before get off the adjustment mode.)