background image

This symbol is intended to alert the user to an immediate danger that may

 

cause loss of 

life and property if the user disregards the warning.

This symbol is intended to alert the user to a possible hazard that may cause loss of life 
and property if the user disregards the warning.

This symbol is intended to alert the user a possible hazard that may cause loss of 
property or injure the user if the warning is disregarded.

To prevent any hazard during operation of Alinco’s radio product, in this manual and on the product you 
may find symbols shown below. Please read and understand the meanings of these symbols before 
starting to use the product.

 Features

● Fre

quency: PMR446 (99ch)

● Power: 0.5W
● Compact size: H103mm x W39mm x D18mm
● Ultra-compact antenna for better portability
● Weight approx. 50g include battery and antenna
● CTCSS and DCS: 39 CTCSS codes, 104 DCS codes (can be set by the menu in radio)
● LED backlight controllable.
● Includes End Beep, Key tone, Low voltage alert, Key lock, VOX and TOT.
● Works with 3.7V 750mAh Li-ion cell

Alert symbol. An explanation is given.

Warning symbol. An explanation is given.

Instruction symbol. An explanation is given.

Summary of Contents for DJ-PN446

















Reviews: