Alinco DJ-CRX1 Instruction Manual Download Page 7

Page: 7 / 72

ARNING

To prevent any hazard during operation of Alinco’s radio product, in this manual and on the product you may

find symbols shown below. Please read and understand the meanings of these symbols before starting to

use the product.

This symbol is intended to alert the user a possible hazard that may cause
loss of property or injure the user if the warning is disregarded.

Alert symbol. An explanation is given.

Warning symbol. An explanation is given.

Instruction symbol. An explanation is given.

This symbol is intended to alert the user to a possible hazard that may cause
loss of life and property if the user disregards the warning.

This symbol is intended to alert the user to an immediate danger that may
cause loss of life and property if the user disregards the warning.

Danger

Alert

Caution

Summary of Contents for DJ-CRX1









































































Search results

Summary of Contents for DJ-CRX1

Reviews:

Related manuals for DJ-CRX1

Brands by name

Popular brands

Alinco DJ-CRX1, Instruction Manual

Search results

Summary of Contents for DJ-CRX1

Reviews:

Related manuals for DJ-CRX1

Brands by name

Popular brands