Professional
FM Transceiver
24
BASIC OPERATIONS
NOTE: Available channel steps: 5K, 6.25K, 10K, 12.5K, 15K, 20K, 25K, 30K and 50KHz in total 9 for
option. Please refer to stepping frequency setup in the SET-MODE chapter.
In Channel mode, press
【
B
】
key/
【
C
】
key to choose the desired channel. Press
【
B
】
key once to
enter the downward channel while press
【
C
】
key to enter the upward channel..
Monitor / Squelch Off
In case the receiving signal is weak and the audio is intermittently cut off by the squelch, press and
hold
【
PF2
】
key. As long as this key is pressed, the squelch including TSQ/DCS unmutes making the
audio easier to hear. Press it again to close.
Receiving
Press[
PF1
] key to turn on the LED located on the upper panel. Repeat it to turn off. Use it only
necessary as it consumes battery considerably.
Select the operating mode and frequency or channel that you wish to operate.
When a signal is received on the frequency that you selected, and S-meter is displayed on the LCD,
then the received signal can be heard. The RX indicator also lights green at this time.
NOTE: Please be aware of the squelch level and selective-calling settings such as CTCSS and DCS as
you may risk not hearing the receiving signal.
